Nordhavn 51
Overview
Pacific Asian Enterprises, Inc. (PAE) is excited to announce a brand new design, the Nordhavn 51, which will follow closely in the wake of its smaller sistership, the N41. Inspired by the N41’s resounding success, the brand new Nordhavn 51 will mimic the same production-like structure, which places emphasis on a set, streamlined build order instead of individual customization.
The two-stateroom, two-head passagemaker answers the calls from customers who are drawn to the N41 design but want more room, an additional head and a flybridge. The Nordhavn 51 will more closely resemble other long range cruising Nordhavns with her separated pilothouse, but her interior will mirror the finishes of the N41. She will be produced as a complete boat that includes stabilizers, bow thruster, and davit among other items as standard.
Powered by twin John Deere 4045AFM85 M1 160 bhp engines, the Nordhavn 51 will be a modern passagemaker to usher in the new decade with state-of-the-art technology at the engineering level and a contemporary design scheme. As is the case with the N41, the Nordhavn 51 will be CE Certified Category A for the most serious offshore use.
Tooling for the N51 is underway and the first hull is expected to lay up in March. She will be built alongside the Nordhavn 41 at our partner factory in Turkey. Hull #1 is expected to launch Summer 2023.
N51 Quick Specs
| LOA: | 50'-9" (15.47 m) |
| LWL: | 48'-4" (14.73 m ) |
| BEAM: | 15'-8” (4.78 m) |
| DRAFT: | 4'-9" (1.45 m) |
| DISPL.: | 71,575 LBS - 1,118.35 CU. FT. - 31.95 LT - (32.53 Metric Tons) @ DWL 57" above Base Line |
N51 Renderings
Exterior
Interior
Drawings
Specifications
Standard Specs
| LOA: | 50′-9″ (15.47 m) |
| LWL: | 48′-4″ (14.73 m ) |
| BEAM: | 15′-8” (4.78 m) |
| BEAM W/L: | 14′-7 3/4 ” (4.08 m ) |
| DRAFT: | 4′-9″ (1.45 m) |
| DISPL.: | 71,575 LBS – 1,118.35 CU. FT. – 31.95 LT – (32.53 Metric Tons) @ DWL 57″ above Base Line |
| FUEL CAPACITY: | 1450 Gallons (5,489 Liters) |
| WATER CAPACITY: | 300 Gallons (1,325 Liters) |
| HOLDING TANK CAPACITY: | 85 Gallons (322 Liters) |
| GRAY WATER TANK CAPACITY: | 85 Gallons (322 Liters) |
STRUCTURE
Hull Lamination schedule per construction plan
Metyx brand multiaxial fabrics for composites and Sisecam brand glass fibers
Skin Coat: DSM ATLACK 580 ACT hiTg vinyl ester resin (132° C)
General laminating resin: DSM Synolite 0288-L-1 (HiTg resin)
Gelcoat: Büfa ISO/NPG spray type; Büfa Marine NPG gelcoat-S
Deck Lamination schedule per construction plan
Metyx brand multiaxial fabrics for composites and Sisecam brand glass fibers
Skin Coat: DSM ATLACK 580 ACT hiTg vinyl ester resin (132° C)
General laminating resin: DSM Synolite 0288-L-1 (HiTg resin)
Gelcoat: Büfa ISO/NPG spray type; Büfa Marine NPG gelcoat-S
Core: Gurit, Airex or Diab core
Cabin side (vertical surfaces)
Cabin top and deck ( horizontal surfaces)
Hull (12″ above water line)
Deck/Hull Joint:
Between deck and hull flange: Crystic Crestomer 1152 urethane acrylate structural
adhesive
Inside of joint: Two (2) layers of mat and woven roving
Mechanical fastening: ¼” (6.35mm) x 20unc on 6″ (15.2 cm) centers where accessible. In areas that cannot be accessed, self-tapping screws are used
Longitudinal Stringers
Hull: port and starboard, engine beds, and floor stringers
Deck: per design
Interior Transverse Floors: per design with foam core
Ballast: internal weight approx. 7000LBS (15,400KG) glassed in-place
Exterior Color
Hull: Pebble Grey # RAL 7032
Deck: Pure White # RAL 9010
Non-Skid: Pure White # RAL 9010
Boot Top: Signal Black # RAL 9004
Bottom Paint: Black
Two (2) coats SeaHawk epoxy barrier coat
Three (3) coats SeaHawk AF33 anti-fouling paint
MACHINERY
Main engines x 2:
John Deere 4045AFM85 M1 160 bhp @ 2300 – 24v start
Transmissions x 2:
ZF220 transmission with 3 to 1 reduction gear
Instrument Panel
deluxe with instrumentation for oil pressure, water temperature, voltage, revolutions, hour meter and alarms. Fly bridge panels
Engine control levers: Morse model #31001-001 Twin S
Control Cables: Morse 33C Supreme length to suit
Propeller Shaft:
2″ (5.08 mm) diameter A22HS stainless steel ( X 2)
Propeller Struts:
Two (2) “Y” struts to tie into stainless steel rudder shoes. Per PAE design
316 stainless steel
DuraMax cutlass bearing
Propeller:
4-blade bronze, 30″ diameter X 00″ pitch ( CM d X CM p) (X 2) counter
rotating
Stern Tube:
FRP
Bearing: rubber cutlass type (X 2)
Stuffing box: tides marine
Fuel filters:
duplex Racor 500 MA plus engine mounted filters x 2
Fuel Transfer system with one Racor 500 and Walboro 12v pump
Fuel gauges at helm dash added magnetic sight guages with electronic sending unit
Fuel Manifold
Timer switch for 60 minute intervals
Wet Exhaust
Groco Sea Strainers.
Marine exhaust slim line FRP mufflers x 2
AC generator Onan Marine QD 11.5 kW
Wet exhaust with waterlift muffler and gas/water separator
Stabilizer System:
Humphree with 0.6 sq.meter fins (6.46sq. Feet) 24vDC electric
Engine cooling system filled with a suitable mixture of coolant/antifreeze to insure
coolant does not freeze for winter shipment
Engine Room floors:
FRP with nonskid (white)
Engine Room finish:
molded FRP engine beds and floors, insulated with Technicon or equivalent fire proof foiled and leaded foam 2″ (51mm) thick. All exposed insulated surfaces lined with perforated anodized aluminum sheets
Engine Room blowers:
Delta T Systems Ignition protected 11″ (279.4) DC Axial Fans with
.00 static pressure flow rates to 1424 CFM (2419 m3/h) 24VDC – Part No. 500-311242IP (X 3) vents to have moisture eliminating louvers by Livos or equivalent
Bow Thruster:
Side Power 24v 13.5 HP bow thruster includes: model #SE210/250TC – 9.8″ (249mm)I.D. tunnel, 2 x #SM896 joy stick control station, #SM897524 automatic
main switch/fuse holder, 500 amp fuse
Plumbing
Water Tank
One (1) tank totaling 350 gallons (1,325 liters)
FRP construction
Fuel Tanks:
Two (2) tanks totaling 1450 gallons (5,489liters)
FRP construction
Inspection plate appropriately positioned for interior access by an average size man.
Each internal baffle with a removable panel to allow access to entire interior of both fuel tanks.
Sight gauges provided to monitor fuel level
Tanks air tested to 4LBS (1.5 KG) per square inch
Baffles provided on 24″ (610mm) centers
Fuel pipe and hoses
Supply line from tank to supply reservoir is ¾” (19mm) I.D. with Vetus brand fuel hoseand reusable fittings
Fuel lines from supply reservoir to engines are ½” (13mm) I.D. with Vetus brand fuel hose and reusable fittings
Fuel lines from supply reservoir to generator are ½” (13mm) I.D. with Vetus brand fuel hose and reusable fittings
Vent lines are fuel certified, reinforced hose ¾” (19mm) I.D.
Water hoses
Cold water: blue 15MM diameter Whale brand tubing with Whale fittings
Hot water: red 15MM diameter Whale brand tubing with Whale fittings
Sea water hoses: Vetus reinforced rubber certified for marine use and provided with
double stainless steel clamps below the water line
Fresh water fill to be Vetus hose
Water Heater:
Seaward #S1100 (11 gallon) (41.6 liters) for 240V and heat exchanger
operation (60HZ) Quick Nautic BXS 45 LT boiler (50HZ)
Thru Hulls:
TruDesign composite non-metalic
Each thru hull has a clearly visible tag indicating its function
Water Pump: FloJet Quad II demand pump 4.9 GPM-115Vac-45PSI #4300-143A with Groco PST-1
Plumbing Fixtures:
Head sinks: VITRA S50 Bowl 480×360 mm.
Galley sink: FRANKE BOX BXX-110-68 Stainless Steel 725×450 mm.
Head faucets: GROHE Essence Single Handle Faucet S-size
Galley faucet: GROHE Minta Single Handle Pull Out Faucet
Shower fixtures:
GROHE New Tempesta Cosmopolitan 100 Shower Rail Set
Thermostatic Control Unit: GROHE GrohFlex Essence Single Function
Bilge Pumps
Electric: Rule 3700 GPH heavy duty pump (X2) Ultra Jr. float switches
Manual: Whale Gusher 30 operable from main salon
1 x High water bilge pump 24 volt Rule 3700 gallons (14,006 liters) per hour – mounted in bilge above normal bilge water height including Ultra Jr. pump switch #WPS-01-24/32 and Ultra bilge alarm #WA-201
Toilet and holding tank pump
Dometic VacuFlush 509 Vacuum Toilet, white 24V
Holding tank: FRP 85 gallons (322 liters)
Sealand T24 pump
Holding tank fitted with a deck pump out fixture
Gray water crossover valve per PAE design
Gray Water
Galley sink, head sinks, shower sumps and washing machine drain to 85 gallon (322 liter) sump tank. Each drain has an appropriate water trap to control odors. Sump includes Sealand Tank Watch 4 24V level indicator and a Sealand T24 waste pump fitted with an 24V Ultra Jr. pump switch #PS02-24volt and auto/manual control panel.
Black water crossover valve per PAE design
“Y”valve installed at gally sink to divert gally drain directly overboard or to holding tank.
Fresh Water wash down spigots at bow, stern, boat deck and engine room
Steering
HyproMarine Electric Command Steering
#HM5160/RS ECS helm c/w 1″ staright shaft x two (2)
H#HM5290/24 ECS power pack 24 vdc x one (1)
#H5195/16 16m ECS harness x one (1)
#H5195/19 19m ECS harness x one (1)
#HC5378 BA200 11TM 2″ bore 11″ stroke steering cylinder x one (1)
Buck Algonquin Heavy Duty tiller arms x two (2)
#HM1995/NPT 1.4″ st/st lever valve x one (1)
#HM2592 Branch tee x two (2)
#HM3242/1 1m hose assembly x four (4)
Hydraulic lines per Hypro specification
By-Pass valve for emergency tiller steering
Steering Wheel:
18″ (457mm) x 2
Emergency Tiller:
attaches to top of starboard rudder post via inspection plate, stows in
lazerrette overhead
RUDDERS and Related Components
Stainless steel plate (X 2)
Rudder Stock: 2″ (50.8mm) A22HS stainless steel
Rudder carrier top: Molded FRP with collar bearing x 2
Rubber cutlass bearing at rudder port openings x 2
Rudder stock stuffing box: Tides Marine x 2
Rudder stock tube: FRP x 2
Electrical
Electrical Panel consisting of the following:
Electrical panel x one (1)
Engine emergency shut off switch and panel with parallel switches
Inverter: Victron Multiplus 120V -3000 Watt – 120 Amp – 24 v Combi Inverter/Charger for US market –
Inverter: Victron Multiplus 230V -3000 Watt – 120 Amp – 24 v Combi Inverter/Charger for EU market –
inverter by-pass switch
Shore power inlet and AC system per PAE design
Smart Plug shore power inlet- 120vac 30amp B30ASSY combo kit- includes 30amp inlet (BM30S) and 30amp connector (BF30) – US builds
Smart Plug shore power inlet- 230vac 32amp B32ASSY combo kit- includes 32amp inlet (BM32S) and 32amp connector (BF32) – EU builds
120 volt 60Hz – US builds
220 volt 50Hz – EU builds
Victron 3600 Watt 115/230 V Isolation Transformer – US Builds
Victron 7000 Watt 230 V Isolation Transformer – EU Builds
Interior outlets per drawing
All galley and head outlets GFCI type
Batteries and 24V DC System per PAE design
Batteries: Eight(8) 255+ AH (8D) Lifeline batteries for 24vdc house applications as well as engine starting (1020 amp hours)
Each battery secured with stainless steel tie downs
Battery Cable
.00 for general battery leads with .0000 for starting and bow thruster
Positive lead is red
Negative lead is yellow
Electrolytic Control
All hardware mounted below waterline grounded into 24V DC ground system
Zincs: One(1) 2-½” x 5-¾ ” (6.35 cm x 14.6 cm) zinc plate tied into the 24V DC ground system
Galvanic isolators on ships service and air conditioning shore power connectors ground
AC Generator Installation
Electrical panel to accommodate AC ship’s power
Group 31 starting battery w/ ability to parallel to house bank for emergency starting
Interior Finish and Interior Equipment
Galley
Refrigerators – Summit #CT663BCSSADA. Stainless steel Refer/Freezer X 1. Summit #FF63BBISSHVADA all refer x 2
Stove: GE Café Series 30″ electric cook top #CP9530SJSS
Oven: GE SS 27″ oven 240 volt – PK7000SFSS
Microwave: GE Space Saver Microwave Oven #JVM6175SFSS, w/exhaust blower, Non-Convection
Compactor: GE Trash compactor – #UGC1680LSS 15″ – stainless
Cabinetry/paneling: Walnut with satin varnish/wall coverings and some painted surfaces
Overhead: individual padded Majilite panels secured in place with Fast Mount system easily removable for service of deck hardware and wiring
Locker interior finish: Formica
Main salon
Floors: Teak and Ebony laminate
Cabinetry/paneling: Walnut with satin varnish/wall coverings and some painted surfaces
Dinette table: Walnut with stainless steel pedestal
Overhead: individual padded Majilite panels secured in place with Fast Mount system easily removable for service of deck hardware and wiring
Locker interior finish: Formica
Cushions with standard vinyl fabric upholstery choices
Walnut valances over windows
Settee starboard side
Free standing chairs on port side with table in between
Lift up TV on starboard side behind settee
Front loading freezer Whynter CUF-301BK, Black 3.0 Cu.ft. For USA 60 HZ
Ugur Deep Freezer UED 3094 DTK White for Europe 50 HZ
Master cabin and Guest cabin
Floors: Teak and Ebony laminate
Cabinetry/paneling: Walnut with satin varnish/wall coverings and some painted surfaces
Overhead: individual padded Majilite panels secured in place with Fast Mount system easily removable for service of deck hardware and wiring
Locker interior finish: Formica
Foam mattress with memory foam topper
Cedar lined hanging lockers
Drop down TV above foot of bunk (Master only)
Heads
Floors: Teak and Ebony laminate
Cabinetry/paneling: Walnut with satin varnish/wall coverings and some painted surfaces
Countertop: White Corian or equivalent
Mirror with sconces
Shower pan fiberglass with molded in nonskid
Overhead: molded FRP
Locker interior finish: vinyl/Formica
Exhaust blower
Glass shower door w/ glass partition
Forepeak
Painted with gelcoat
Drains overboard
Commissary/Laundry area:
GE® 24″ 2.4 Cu. Ft. ENERGY STAR® Front Load Washer with Steam
GE® 24″ 4.1 Cu.Ft. Front Load Ventless Condenser Electric Dryer with Stainless Steel Basket
Shelving on port and starboard sides above actuators
Gelcoated FRP finish with Lonseal flooring
Pilot House
Floors: Teak and Ebony laminate
Cabinetry/paneling: Walnut with satin varnish/wall coverings and some painted surfaces
Countertops and dash panels: black formica with stiched leather wrapping
Overhead: individual padded Majilite vinyl panels secured in place with 3M industrial Velcro
Table: Walnut
Locker interior finish: FRP/formica
Cushions with vinyl upholstery
Chart light: Imtra 24 volt F4 LED Touch Black Finish
Walnut louvers on tops of console for ventilation of electronics
Chart drawer under settee
Locker doors and drawers
All locker doors and drawers to SOUTHCO Pull to Open Square Latch MP-05-212-11
All drawers to be on stainless steel slides
Interior door handles
Interior door handles to be HAFELE BLAIRE with HAFELE Privacy Door Locks
Lighting
Main overhead lighting: Quick Marine Lighting Bryan V 4W IP66 Mirror Polished 316SS Warm White
Bulkhead reading lights : Quick Marine Lighting QB Swivel 4W Chrome Finish Warm White
Engine/laz Room DC Lights: SANEL LED lights (4) total
Exterior Overhead Lights: Quick Marine Lighting Sonia 105 mm. 4W IP66 Mirror Polished 316 SS Daylight
Courtesy lights: Quick Marine Lighting Gladis 1 Chrome Finish 1.5W IP65 Daylight
Interior Hanging Locker Lights: Quick Marine Lighting Syria Velvet 15 1.5W Aluminum
FinishExterior Courtesy Lights: Quick Marine Lighting Grace 1 Chrome Finish 1,5W IP 65 Daylight
Switch and Outlets: Vimar Idea Classica Chrome Finish
Interior hand rails to be stainless steel
Exterior Finish and Exterior Equipment | Safety Equipment | Cabin Heating And Cooling Systems | Navigational Equipment | Entertainment System
Exterior Finish and Exterior Equipment
Horizontal surfaces on deck have Gibco #102 diamond pattern non-skid. Nonskid to be #9010 white
Chocks for mooring lines:
Transom: stainless steel with built in cleat
Transom sides: stainless steel with built in cleats x 2
Amidships: stainless steel with built in cleats x 2
Bow: stainless steel with built in cleats x 2
Two (2) x 12″ (30.5 cm) stainless steel cleats at bow
Upper and lower rub rails molded from FRP with a stainless steel rub strip. Rub rails integral to hull
Hull windows and Ports:
Lewmar #30209900 Stainless steel round ports in forward cabin trunk x 6 and Lewmar 30209900 Stainless steel round in cabin side x 2. Nine (9) total Fixed rectangular hull windows in fwd cabin port and starboard sides and port guest head and cabin with 3/8″ thick tempered glass.
Bow Roller:
Double Stainless steel bow roller designed to accommodate a 100 lbs. (45 kg) Ultra anchor on starboard roller and 3 stranded anchor rode on port roller.
100lb. (45kg) ultra anchor with swivel shackle
400 feet (122m) 3/8″ (10mm) ISO4565 chain
Bitter end of chain to be shackled with 3/4″ line to large pad-eye in chain locker
Windlass:
Lofrans SX3 1700 W 24vdc windlass to be mounted on a molded FRP base #600084 chain gypsy for 10mm ISO4565 chain. 2 x control panel with foot switches at fore deck.
Deck hatches:
Lewmar Flush 3G standard color with proper drainage channels or scupper drains to suit. Foredeck hatch to have optional 2G handles to comply with
escape hatch ISO requirements along with a stowable ladder.
Lewmar #60 x 1 on foredeck
Lewmar #20 x 3 in front of pilot house and over owner’s cabin
10″ diameter flush deck hatch for chain locker inspection and wash down TBD
All hatches fitted with screens
Freeing ports:
Cockpit x 2 38″ x 5.75″ with spring loaded flaps, 2 x 22″ x 3.75″ at bow without flaps.
Deck drains:
2″ diameter per deck plan
Windshield wiper:
Roca parallel sweep RW with long stud BS blade and AS arm x two (2)
Horn:
Kahlenberg K380 + Viair Compressor
Lazerette hatch with drains and lockable lift handles
Fly Bridge:
FRP settee with cushions and table, helm chairs x 2, steering wheel and engine, thruster and windlass controls, glass venturi, FRP radar arch w/ stainless steel stinger for anchor light and wind instruments. Storage garage behind F/B with double opening doors. (optional Sunbrella “Bimini Top”)
Wheelhouse and salon windows to be .39″ (10 mm) tempered glass
Windows:
Sliding saloon and side wheel house windows to be tinted. Wheel house front windows to be clear and fitted with defogging resistant glass with 24v heating elements
Davit:
Steelhead ES1000 4 function hydraulic yacht crane, 6-10′ reach, power rotation –
24 volt
Rails:
All exterior rails to be 1 1/4″ diameter unless otherwise noted
Salon door:
Dutch door FRP construction
Side doors at pilot house:
Dutch door FRP construction
FRP boarding door in transom, starboard bulwark aft with blind dogs and Stainles steel gates through rails port and starboard
Stainless steel U rails 1 1/2″ dia.@ swim step x 2
Stainless steel and teak ladder from lower aft deck to boat deck
Swim ladder mounted on swim step to comply with CE requirements
ACR searchlight RCL 100 LED
Deck lockers: 2 x flush deck fender lockers on starboard side deck. 1 x locker at bow for dock line, winch handle and anchor bridle storage.
Safety Equipment
All US Coast Guard safety gear
1 x Lalizas LifeLink : 20 USD
8 x Lalizas Alpha 150 N Inflatable Life Jackets : 65 USD / Each 6 x Hand Flare : 15,50 USD / Each
2 x Smoke Signal : 37 USD / Each
6 x Parachute Signal : 38 USD / Each
4 x 2kg Dry Powder Extinguisher for Cabins And Saloon : 30 USD / Each 1 x Spray
Horn : 14 USD
Fireboy 1 CG@ for 500QF in engine room
1X Fireboy ES6 – 6 circuit shutdown for 3 engines and 3 blowers
Lalizas Oceano SOLAS Life Raft- 6 Persons, Container Type With Cradle
Cabin Heating And Cooling Systems
Pilot house: S10-R-115V-REV-R410a x 2 self contained units
Master stateroom: S10-R-115V-REV-R410a x 1
Guest Stateroom: S8-R-115V-REV-R410a x 1
Saloon + Galley: S13-R-115V-REV-R410a x 2
Laundry: S6-R-115V-REV-R410a x 1
Webasto EVO 55 Air Heating system for Cabins, Pilot house and Saloon
Cabin Heating And Cooling Systems
Pilot house: S10-R-115V-REV-R410a x 2 self contained units
Master stateroom: S10-R-115V-REV-R410a x 1
Guest Stateroom: S8-R-115V-REV-R410a x 1
Saloon + Galley: S13-R-115V-REV-R410a x 2
Laundry: S6-R-115V-REV-R410a x 1
Webasto EVO 55 Air Heating system for Cabins, Pilot house and Saloon
Navigational Equipment
Garmin Chart plotter and Sounder – GPS Map 8616 XSV 16″ screen in Wheelhouse and 8616 non XSV 16 inch on fly bridge
Garmin Radar GMR 4′ open array – 4KW
Garmin Autopilot – Reactor Hydraulic Corepack with Smart Pump controls in WH and FB
Garmin VHF AIS Marine Radio in Wheelhouse and on Flybridge
Garmin AIS 600 Transceiver
Garmin GCTM 12 Camera mounted in engine room
Garmin P 319 Transducer
Entertainment System
Fushion MS-UD755 Marine stereo with Blue Tooth connectivity
Fusion SG F88 8.8 inch Coaxial speaker mounted in saloon and aft deck overheads 4
total
28″ LED TV in saloon and owner’s cabin and fwd guest cabin 3 total. Salon TV on lift. Owner’ cabin TV w/ drop down mechanism from overhead. Guest cabin on wall mount.
Entertainment System
Fushion MS-UD755 Marine stereo with Blue Tooth connectivity
Fusion SG F88 8.8 inch Coaxial speaker mounted in saloon and aft deck overheads 4
total
28″ LED TV in saloon and owner’s cabin and fwd guest cabin 3 total. Salon TV on lift. Owner’ cabin TV w/ drop down mechanism from overhead. Guest cabin on wall mount.
Videos
Coming soon