-
The Introduction
of a New Legend...
Nordhavn 41
Overview
After over seven million nautical miles of documented ocean crossings, Nordhavn has set records that will never be challenged – except maybe by other Nordhavns.
The venerable Nordhavn 40 holds the world record for the fastest circumnavigation by a production powerboat. How do you top that? Our answer: use all of our experience and start from scratch, make no compromise, spare no expense, employ the latest design technology and incorporate the world’s most advanced Computational Fluid Dynamics analysis to produce the most capable, efficient, safe and sea kindly Passagemaker ever built. We call it the all new Nordhavn 41.
Imagine picking up your new Nordhavn 41 at the beautiful Ayvalik Marina on the West Coast of Turkey – less than two miles from our construction yard – and setting out for familiarization and shake down cruising amongst the many islands just offshore in the Aegean Sea. Unlimited help and expertise at hand, our construction experts will tend to any new boat issues and within days you’ll be ready to head west – less than 100 miles across to the first of hundreds of Greek Islands, a cruising paradise. Call on Athens, transit the ancient Corinth Canal and visit the port towns of the Gulf or Corinth; onward to the west, an overnight passage across the Ionian to Italy or maybe north into the Adriatic Sea. The possibilities are endless and the mileage between spectacular ports is minimal. A summer cruise from Ayvalik, through the Greek Islands, around the Boot of Italy, to Naples, Rome, Genoa, Monaco, the French Riviera, Saint Tropez, the Spanish Coast and Balearic Sea and on to Palma, Mallorca, can all be done on less than a single tank of Diesel.
After a summer cruising in some of the most beautiful and interesting areas in the world, arrangements will have already been made for your new boat to be prepped and loaded aboard a transport ship departing Palma and bound for Ft. Lauderdale. Drop her off with our agent in Gibraltar and the next time you see her is at our Nordhavn facility in North Palm Beach – clean, serviced and ready to depart on your next adventure.
Sound like an ambitious summer cruise? It isn’t, really. You’ll be comfortable knowing that your boat can handle even the most adverse conditions with relative ease. She’s been designed to CE Certification Category A –designed to be operated in winds of over Beaufort Force 8 (over 40 knots), and significant wave heights above 13 feet, but excluding abnormal conditions such as hurricanes. Very few yachts in the 40-foot range can meet this stringent rating but the 41 is an exception. The new N41 is designed and equipped to provide the safest most comfortable home afloat capable of crossing any ocean so the itinerary described above can be done by the average cruising couple with great confidence. Plus, berthing options in marinas and mooring facilities are more abundant for a yacht in this size range whereas a 60- foot yacht will have to rely upon anchoring much more. The standard twin engines and bow thruster will also allow great maneuverability in tight quarters.
The Nordhavn 41 is available with two layouts: a luxurious single Owners cabin with abundant drawer space, a walk-in closet plus a very large head and stall shower; Or a two stateroom version for those who might have regular guests or children aboard. The single stateroom version still allows for guests with sleeping- length port and starboard settees in the salon.
Designed with the sea and cruising in mind, her profile is necessarily low resulting in a sleek, attractive look. Her double side decks allow easy movement topside during docking and mooring. A powerful 12-foot center console tender can be accommodated on deck and a beautiful 800-lb. davit is standard. After Nordhavn’s Chief of Design, Jeff Leishman, designed the preliminary hull lines, profile and general arrangement plan, PAE engineer Phil Arnold worked on the CE Category A compliance as well as the structural engineering. We then contracted with our new partners in Holland, Vripack Yacht Design, to put the hull through a complete Computational Fluid Dynamic test program where the hull form was analyzed and modified to maximize efficiency and optimize running angles with precision. The study resulted significant improvements in performance, all of which have been incorporated into the final hull lines.
The selection of the finest equipment was undertaken and we were determined to provide virtually everything we felt important as standard. The yacht is being fitted with two Kubota 75 hp diesels that are low pressure turbo-charged but mechanically injected. The marinization is done by the UK firm Beta Marine. These engines routinely run over 20,000 hours in generator applications and are free of the electronic controls required by larger HP engines to meet ever-tightening environmental requirements. There is no CPU to fail – just a beautifully simple, mechanically injected – but very clean burning – diesel engine. Each engine is capable of pushing the yacht at cruising speed and with large reduction gears and propellers in the most desirable location possible. The propeller efficiency has reached almost 60% which is exceptionally good. The propellers are protected by a deep and long keel and supported by robust V struts for maximum strength.
In order to really experience the amazing sea keeping qualities of a properly designed displacement hull, stabilizing is essential. We have selected the best available and our standard boat is equipped with ABT Trac 220 stabilizers with 6-sq-ft. fins. With her beautiful hull, low and purposeful profile and 4,000 pounds of lead ballast in her keel, this Nordhavn will provide an amazingly stable ride in the roughest of conditions.
By pre-purchasing all our equipment and implementing the most efficient European construction techniques, we are offering an exceptionally equipped yacht, built to the highest standards, at an astounding introductory price.
Consider this list of standard equipment;
- Twin Beta 75 hp diesels with 3.942 to 1 reduction gears
- Tides Marine dripless shaft seals
- Delta T engine room ventilation
- ABT Trac hydraulic stabilizers
- Side Power Bow Thruster
- Hypromarine Electronic Command Steering
- 300 gallons of water storage
- 900 gallons of fuel storage
- Grohe sink and shower fixtures
- Vachflush head
- Outback pure sinewave inverter 2.8 KW
- One thousand amps AGM house batteries
- 7/9 KW Onan generator in sound enclosure
- Vitrifrigo stainless steel refer freezer
- All LED lighting
- Combination washer dryer
- Extra freezer in commissary
- Reverse cycle air conditioning – saloon and staterooms
- Webasto forced air diesel heating system
- Fusion Marine stereo
- LED TVs in saloon and Owners cabin
- Garmin 8616 XSV – 16” screen with Blue chart – Radar, Chart Plotter and Depth Sounder
- Garmin Autopilot
- Garmin VHF Radio
- Garmin AIS 600 Transceiver
- Garmin GC 12 camera mounted in engine room
- ACR Search Light
- Lofrans SX3.5 1700 W vertical capstain windlass
- 300 feet chain and anchor
- Kahlenberg horns and compressor
- Nick Jackson Pipe Davit – 800 lbs capacity
- 400 watts flexible solar panels on saloon roof
- Fireboy with shutdowns for engine room fire protection
- Fireboy with shutdowns for Lazarette
- Revere Canister life raft – four person
There has never been a yacht so beautifully designed and built with such capability. It is said that cruising Europe by yacht will change one’s life. Find out how affordable and confidently you can embark on the adventure of a lifetime aboard a yacht destined for greatness.
The new Nordhavn 41 – Oceans Apart from the Rest!
N41 Quick Specs
LOA: | 41'- 41/4" (12.60 m) |
LWL: | 40'-0" (12.19 m) |
BEAM: | 13'- 11" (4.24 m) |
DRAFT: | 4' 6 ½" (1.38 m) |
DISPL.: | 43,300LBS, 19.2 LT, 677CU. FT. (19.5 METRIC TONS) |
Specifications
Standard Specs
LOA: | 41′- 41/4″ (12.60 m) |
LWL: | 40′-0″ (12.19 m) |
BEAM: | 13′- 11″ (4.24 m) |
BEAM W/L | 13′-4 1/2″ (4.08m) |
DRAFT: | 4′ 6 ½” (1.38 m) |
DISPL.: | 43,300LBS, 19.2 LT, 677CU. FT. (19.5 METRIC TONS) |
WATER CAPACITY: | 300 GALLONS (1,136 LITERS) |
FUEL CAPACITY: | 900 GALLONS (3407 LITERS) |
HOLDING TANK CAPACITY: | 70 GALLONS (265 LITERS) |
GRAY WATER CAPACITY: | 70 GALLONS (265 LITERS) |
Basic Structure
1 | Hull lamination schedule per construction plan | |
a | Metyx brand multiaxial fabrics for composites and Sisecam brand glass fibers | |
b | Skin Coat: DSM ATLACK 580 ACT Hi Tg (132 C degree) Vinyl ester resin | |
c | General laminating resin: DSM Synolite 0288-L-1 (Hi TG Resin) | |
d | Gelcoat: Bufa İSO/NPG spray type,BÜFA®-Marine NPG-Gelcoat-S | |
2 | Deck lamination schedule per construction plan | |
a | Metyx brand multiaxial fabrics for composites and Sisecam brand glass fibers | |
b | Skin Coat: DSM ATLACK 580 ACT Hi Tg (132 C degree) Vinyl ester resin | |
c | General laminating resin: DSM Synolite 0288-L-1 (Hi TG Resin) | |
d | Gelcoat: Bufa İSO/NPG spray type,BÜFA®-Marine NPG-Gelcoat-S | |
3 | Core: Gurit, Airex or Diab Core Baltek Balsa | |
a | Cabin side (vertical surfaces) | |
b | Cabin top and deck (horizontal surface) | |
c | Hull ( 12″ above w/l) | |
4 | Deck/hull joint: | |
a | Between deck and hull flange: Crystic Crestomer 1152 urethane acrylate structural adhesive | |
b | Inside of joint: Two (2) layers mat and woven roving | |
c | Mechanical fastening: 1/4″ (6.35 mm) x 20unc thru bolt on 6″ (15.2 cm) centers where accessible. In areas that cannot be accessed self-tapping machine screws used | |
5 | Longitudinal Stringers | |
a | Hull: port and starboard, engine beds, and floor stringers | |
b | Deck: per design | |
6 | Interior transverse floors: per design w/ foam core | |
7 | Ballast: internal weight 4000 lbs (1814 kg) – glassed in place | |
8 | Hull Color – Pebble Gray # RAL 7032 | |
a | Deck – Pure White # RAL 9010 | |
b | Non Skid – Signal White # RAL 9003 | |
c | Boot top – Signal Black # RAL9004 | |
9 | Bottom Paint (Black) | |
a | Two (2) coats Sea Hawk epoxy barrier coat | |
b | Three (3) coats of Sea Hawk AF33 anti-fouling paint |
Machinery
1 | Engines- Betamarine 85T x 2 Kubota Model: V3307 4 cylinder 74bhp @ 2800rpm 70amp 12v alternator heat exchanger cooling | |
a | Transmission : PRM 750 box at 3.94 :1 straight reduction gear x 2 | |
b | Engine instrument panel: deluxe with instrumentation for oil pressure, water temperature, voltage, revolutions, hour meter, with alarms | |
c | Sea Star Solutions engine control levers model # MT-3 dual function | |
d | Morse control cables 33C Supreme length to suit | |
2 | Propeller shaft:1 3/4 ” (4.44 cm) diameter A22 x 2 | |
a | Standard S.A.E. taper | |
3 | Propeller struts x 2 V shaped. Per PAE design. | |
a | Cast Bronze | |
b | Cutlass bearing Dura Max | |
4 | Propeller: 4-bladed bronze, 28″ diameter x ” pitch ( cm d x cm p) x 2 counter rotation | |
5 | Stern tube: FRP | |
a | Bearing: rubber cutlass type x 2 | |
b | Stuffing box: Tides Marine | |
6 | a | Fuel filters: duplex Racor 500 MA plus engine mounted filters x 2 |
b | Fuel Transfer system with one Racor 500 and Walboro 12v pump | |
c | Fuel gauges at helm dash added magnetic sight guages with electronic sending unit | |
d | Fuel Manifold | |
e | Timer switch for 60 minute intervals | |
7 | Wet Exhaust | |
8 | Engine cooling system filled with suitable mixture of coolant/antifreeze to insure coolant does not freeze for winter shipment | |
9 | Engine room floors: FRP with nonskid | |
10 | Engine room finish: molded FRP engine beds and floors, insulated with Technicon or equivalent fire proof foiled and leaded foam 2″ (5.08 cm) thick. All exposed insulated surfaces lined with perforated anodized aluminum sheets | |
11 | Engine room blowers: Delta T Systems Ignition protected 11 Inch (279.4) DC Axial Fans with flow rates to 1424 CFM (2419 m3/h) 12 Volt DC - Part No. 500-311122IP x 2 |
Plumbing
1 | Water tanks: | |
a | Number and capacity: One (1) tanks totaling 300 gallons (1136 liters) | |
b | FRP construction | |
2 | Fuel tank: | |
a | Number and capacity: Two (2) tank totaling 900 gallons (3407 liters) | |
b | FRP construction per plan | |
c | Inspection plate appropriately positioned for interior access by average size man. Each internal baffle with a removable panel to allow access to entire interior of both fuel tanks | |
d | Alum Supply tank | |
e | Sight gauges provided to monitor fuel level | |
f | Tanks air tested to 4 lbs (1.5 kg) per sq. inch | |
g | Baffles provided on 24″ (61cm) centers | |
3 | Fuel pipe and hose: | |
a | Supply line from tank to supply reservoir is 3/4″ (1.9 cm) I.D. with Vetus brand fuel hose and reusable fittings | |
b | Fuel lines from supply reservoir to engines are 1/2″ (1.27 cm) I.D. with Vetus brand fuel hose and reusable fittings | |
c | Fuel line from supply reservoir to optional generator 1/2″ (1.27 cm) I.D. with Vetus brand fuel hose and reusable fittings | |
d | Vent lines are fuel certified, reinforced hose 3/4″ (1.9 cm) I.D. | |
4 | Water hoses: | |
a | Cold water: blue 15mm diameter Whale brand tubing system or equivalent with all Whale fittings | |
b | Hot water: red 15mm diameter Whale brand tubing with all Whale fittings | |
c | Sea water hoses: Vetus reinforced rubber certified for marine use and provided with double stainless steel clamps below the water line | |
d | Fresh water fill hose to be Vetus | |
5 | Water heater: Seaward #S1100 (11 gallon) (41.6 liters) for 110 volt and heat exchanger operation for USA , Quick Nautic BXS 45 Lt Boiler for Europe | |
6 | Thru Hulls: Trudesign Composite with ABYC H27 compliant load bearing collar | |
a | Each thru hull has a clearly visible tag indicating its function | |
7 | Water pump: Flojet Quad II Demand Pump 4.9 GPM 12 VDC 45 PSI # 4300-143A with Groco PST-1 | |
8 | Plumbing fixtures: | |
a | Head sink: VITRA S50 Bowl 480×360 mm. | |
b | Galley sink: FRANKE BOX BXX-110-68 Stainless Steel 725×450 mm. | |
c | Head faucet: GROHE Essence Single Handle Faucet S-size | |
d | Galley faucet: GROHE Minta Single Handle Pull Out Faucet | |
e | Shower fixture : GROHE New Tempesta Cosmopolitan 100 Shower Rail Set | |
f | Thermostatic Control Unit: GROHE GrohFlex Essence Single Function | |
9 | Bilge pumps: | |
a | Electric: Rule 3700 GPH heavy duty pump (X2) Ultra Jr. float switches | |
b | Manual: Whale Gusher 30 operable from main salon | |
c | 1 x High water bilge pump 12 volt Rule 3700 gallons (14,006 liters) per hour – mounted in bilge above normal bilge water height including Ultra Jr. pump switch #WPS-01-24/32 and Ultra bilge alarm #WA-201 | |
10 | Toilet and holding tank: | |
a | Dometic VacuFlush 509 Vacuum Toilet, white 12v | |
b | Holding tank: FRP 70 gallons (265 liters) | |
c | Sealand T12 pump | |
d | Holding tank fitted with a deck pump out fixture | |
e | grey water crossover valve per PAE drawing | |
11 | Gray water tank: 70 gallons (265 liters) | |
a | Galley sink, head sink, shower sump and washing machine drain to 70 gallon (265 liter) sump tank. Each drain has an appropriate water trap to control odors. Sump includes Sealand Tank Watch 4 12 volt level indicator and a Sealand T12 waste pump fitted with an 12 volt Ultra Jr. pump switch #PS02-12volt and auto/manual control panel. | |
b | black water crossover valve per PAE drawing | |
12 | Fresh water wash down spigots at bow and stern |
Electrical
1 | Electrical panel set consisting of the following: | |
a | Electrical panel x one (1) | |
b | Engine emergency shut off switch and panel with parallel switches | |
c | Inverter: Victron Multiplus 120V -3000 Watt – 120 Amp – 12 v Combi Inverter/Charger for US market – | |
d | Inverter: Victron Multiplus 230V -3000 Watt – 120 Amp – 12 v Combi Inverter/Charger for EU market – | |
inverter by-pass switch | ||
2 | ||
a | Shore power inlet and AC system per PAE design | |
b | Smart Plug shore power inlet- 120vac 30amp B30ASSY combo kit- includes 30amp inlet (BM30S) and 30amp connector (BF30) – US builds | |
c | Smart Plug shore power inlet- 230vac 32amp B32ASSY combo kit- includes 32amp inlet (BM32S) and 32amp connector (BF32) – EU builds | |
d | 120 volt 60Hz – US builds | |
e | 220 volt 50Hz – EU builds | |
f | Victron 3600 Watt 115/230 V Isolation Transformer | |
g | Interior outlets per drawing | |
All galley and head outlets GFCI type | ||
3 | Battery and DC system 12v per PAE design | |
a | Batteries: Six(6) 255+ AH (8D) Lifeline batteries for house applications (1530 amps) | |
b | Each battery secured with stainless steel tie downs | |
c | Battery select switch (OFF , 1, 2, ALL) | |
4 | Battery cable: .00 for general battery leads with .0000 for starting and bow thruster | |
a | Positive lead is red | |
b | Negative is yellow | |
5 | Electrolytic control: | |
a | All hardware mounted below waterline grounded into 12 volt DC ground system | |
b | Zincs: One(1) 2-1/2″ x 5-3/4″ (6.35 cm x 14.6 cm) zinc plate tied into the 12 volt DC ground system | |
c | Galvanic isolators on ships service and air conditioning shore power connectors ground | |
6 | AC Generator Installation | |
a | Electrical panel to accommodate AC ship’s power | |
b | Group 31 starting battery w/ ability to parallel to house bank for emergency starting |
Steering
1 | Hypro Marine Electronic Command Steering System comprised of the following components: | |
a | I/B Cylinder BA150 9TM – Brass | |
b | ECS Helm Unit Front Mount | |
c | ECS Power Unit | |
d | ECS Wiring Harness Assembly 15m | |
e | 1/4″ ST/ST Ball Valve NPTF | |
f | Tie rod | |
g | Tiller arm x 2 | |
2 | Hydraulic lines | |
3 | By-pass valve for emergency tiller steering | |
4 | Steering wheel: 18″ (45.72 cm) x 1 | |
5 | Emergency tiller: attached to top of starboard rudder post via inspection port and stows in lazerrette | |
RUDDERS: Airfoil cast bronze x2 | ||
1 | Rudder stock: 2″ (5.08 cm) Airfoil cast bronze | |
2 | Rudder carrier top: Molded FRP | |
3 | Tides Marine Tube system including bearings and lip seal |
Interior Finish / Equipment
1 | Galley | |
a | Refrigerator – Vitrifrigo #DW250 Refer/Freezer drawers | |
b | Stove top -“True Induction” triple burner cook top 120vac with pot two pot holders for USA – Wolf triple burner induction cooktop 240V AC with two pot holders for EUROPE | |
c | GE Profile™ Series 1.5 Cu. Ft. Countertop Convection / Microwave Oven PEB9159SJSS for USA – GAGGENAU BM484110 COMBI MICROVAWE OVEN 220/240V 50-60 HZ for Europe | |
d | Cabinetry/paneling – Walnut with a satin varnish | |
e | Stove exhaust blower: | |
f | Overhead: individual padded Majilite panels secured in place with Fast Mount system easily removable for service of deck hardware and wiring | |
g | Locker interior finish: Formica | |
h | Countertop: White Corian or equivalent | |
2 | Main salon/ helm area | |
a | Floors: Teak and ebony laminate | |
b | Cabinetry/paneling: Walnut with satin varnish | |
c | Dinette table: Walnut with stainless steel pedestal | |
d | Overhead: individual padded Majilite panels secured in place with Fast Mount system easily removable for service of deck hardware and wiring | |
e | Locker interior finish: Formica | |
f | Cushions with standard vinyl fabric upholstery choices | |
g | Walnut valances over windows | |
h | Settee on port and starboard side | |
i | Custom bench seat with folding bolster to allow for standing. Mounted on walnut box with storage under | |
3 | Master cabin | |
a | Floors: Teak and ebony laminate | |
b | Cabinetry/paneling – Walnut with a satin varnish | |
c | Overhead: individual padded Majilite panels secured in place with Fast Mount system easily removable for service of deck hardware and wiring | |
d | Locker interior finish: Formica | |
e | Foam mattress with memory foam topper | |
4 | Head | |
a | Floors: Teak and ebony laminate | |
b | Countertop: White Corian or equivalent | |
c | Mirror on medicine cabinet | |
d | Shower pan fiberglass with molded in nonskid | |
e | Overhead: molded FRP | |
f | Locker interior finish: vinyl/Formica | |
g | Exhaust blower | |
h | Bi-fold shower door | |
5 | Forepeak | |
a | Painted with gelcoat | |
b | Drains overboard | |
6 | Guest Stateroom | |
a | Floors: Teak and ebony laminate | |
b | Cabinetry/paneling – Walnut with a satin varnish | |
c | upper / lower bunks with foam mattress | |
d | hanging locker and night stand under upper bunk | |
e | dresser with drawers at forward end | |
f | Overhead: individual padded Majilite panels secured in place with Fast Mount system easily removable for service of deck hardware and wiring | |
7 | Commissary area: | |
a | Spendide Combo washer dryer Combo-o-matic 7100xx for USA Siemens IQ500 Series Combo washer /dryer for Europe | |
b | Front loading freezer Whynter CUF-301BK, Black 3.0 Cu.ft. For USA Ugur Deep Freezer UED 3094 DTK White for Europe | |
c | shelving on port side | |
d | Access hatch with ladder | |
e | Gelcoated FRP finish | |
8 | All locker doors and drawers to SOUTHCO Pull to Open Square Latch MP-05-212-11 | |
9 | Interior door handles to be HAFELE BLAIRE with HAFELE Privacy Door Locks | |
10 | Lighting | |
a | Main overhead lighting: Quick Marine Lighting Bryan V 4W IP66 Mirror Polished 316SS Warm White | |
b | Bulkhead reading lights: Quick Marine Lighting QB Swivel 4W Chrome Finish Warm White | |
c | Engine/laz Room DC Lights: SANEL LED lights (4) total | |
d | Exterior Overhead Lights: Quick Marine Lighting Sonia 105 mm. 4W IP66 Mirror Polished 316 SS Daylight | |
e | Courtesy lights: Quick Marine Lighting Gladis 1 Chrome Finish 1,5W IP65 Daylight | |
f | Interior Hanging Locker Lights: Quick Marine Lighting Syria Velvet 15 1,5W Aluminium Finish | |
g | Exterior Courtesy Lights: Quick Marine Lighting Grace 1 Chrome Finish 1,5W IP 65 Daylight | |
h | Navigation Lights: Hella NaviLED Pro Navigation Lights | |
11 | Switch and Outlets: Vimar Idea Classica Chrome Finish | |
12 | Interior hand rails to be stainless steel |
EXTERIOR, DECK HARDWARE AND EQUIPMENT
1 | Horizontal surfaces on deck have diamond pattern non-skid. Nonskid to be white | |
2 | Chocks for mooring lines: | |
a | * Transom: stainless steel | |
b | * Transom sides: stainless steel bollards x 2 | |
c | * Amidships: stainless steel | |
d | * Bow: stainless steel bollards x 2 | |
e | * Two (2) x 12″ (30.5 cm) stainless steel cleats at bow | |
f | * Two (2) x 10″ (25.4 cm) stainless steel cleats amidships | |
g | * One (1) x 10″ (25.4 cm) stainless steel cleat for stern | |
3 | Upper and lower rub rails molded from FRP with a stainless steel rub strip. Rub rails integral to hull | |
4 | Ports: Lewmar 30133000 Round Stainless Steel portlights 250 mm (7 ea), CE Approved, forward cabin sides; Lewmar 30169700 Round Stainless Steel portlight 296 mm, CE Approved, port cabin | |
5 | Bow Roller: Stainless steel bow roller designed to accommodate a 100 lbs (45 kg) Ultra anchor | |
6 | Stainless steel stanchions starboard side deck and around foredeck and boat deck 1-1/4″ (3.2 cm) diameter. Pulpit to be 1 1/4″ (3.2 cm) diameter with socket for burgee. Hooking points on stanchion base | |
7 | Windlass: Lofrans SX3.5 1700 W VWC 12vdc windlass to be mounted on a molded FRP base #600084 chain gypsy for 10mm ISO4565 chain | |
8 | Anchor & Chain: 100 lbs (45 kg) Ultra anchor, 300 ft 10mm ISO4565 chain | |
9 | Deck hatches: Lewmar Flush 3G with outside opening levers standard color with proper drainage channels or scupper drains to suit | |
a | Lewmar #60 x 2 on foredeck | |
b | Lewmar #60 pilot house | |
c | Lewmar #70 for access to boat deck | |
d | Round hatch for chain locker inspection and wash down TBD | |
10 | Windshield wiper: Roca parallel sweep RW with long stud BS blade and AS arm x two (2) | |
11 | Horn: Kahlenberg K380 + Viair Compressor | |
12 | Lazerette hatch with drains | |
13 | Mast and supports: Fabricated aluminum with radar mount and strong backs per design | |
14 | Windows: Salon windows 8 mm tempered glass, tinted; Hull windows, 11.5 mm tempered/laminated glass, tinted; Wheelhouse, 11.5 mm tempered/laminated glass. | |
15 | Windows: Sliding salon windows. Wheel house front windows are fitted with defogging resistence | |
16 | Dinghy Davit | |
a | Stainless steel pipe davit | |
b | 12 rule winch | |
c | Blocks and tackle | |
d | Stainless steel saftey rail around davit area | |
17 | Salon door: Dutch door FRP construction | |
18 | Side door at helm station: Dutch door FRP construction | |
19 | FRP boarding door in transom with blind dog | |
a | Boarding step port and starboard | |
20 | Stainless steel U rails 1 1/2″ dia.@ swim step x 2 | |
21 | Stainless steel and teak ladder from lower aft deck to boat deck | |
22 | Swim ladder mounted on swim step to comply with CE requirements | |
23 | ACR searchlight RCL 100 LED |
SAFETY EQUIPMENT:
a | All US Coast Guard safety gear 1 x Lalizas LifeLink 8 x Lalizas Alpha 150 N Inflatable Life Jackets 6 x Hand Flare 2 x Smoke Signal 6 x Parachut Signal 4 x 2kg Dry Powder Extinguisher for Cabins And Saloon 1 x Sprey Horn |
**Safety Equipment to be CE compliant with European equivalent for EU models ** | |
b | Fireboy 1 CG@ for 300QF in engine room |
c | 1X Fireboy ES3 – 3 circuit shutdown for 2 engines and one blower |
d | Fireboy 1X CG2 for Lazarette – 200QF |
e | Fireboy 1X Fireboy – 3 circuit shutdown fot generator in lazarette |
f | Lalizas Oceano SOLAS LifeRaft- 6 Persons, Container Type With Cradle |
Cabin Heating And Cooling Systems | |
a | Webasto Self Contained Air Condition Systems 10000 BTU For Cabins 27000 BTU For Saloon X 2 13000 |
b | Webasto EVO 55 Air Heating system for cabins and salon |
a | Entertainment system |
b | Fusion MS-UD755 Marine stereo with Blue Tooth connectivity |
c | Fusion SG F88 8.8 inch Coaxial speaker mounted in salon overhead |
28″ LED TV in salon and owner’s cabin | |
Audio control from cabins Fusion | |
Navigational equipment: | |
a | Garmin Chartplotter and Sounder – GPS Map 8616 XSV 16″ screen |
b | GarminRadar GMR 4′ open array – 4KW |
c | Garmin Autopilot – Reactor Hydraulic Corepack with Smart Pump |
d | Garmin VHF AIS Marine Radio |
e | Garmin AIS 600 Transceiver |
f | Garmin GCTM 12 Camera mounted in engine room |
g | Garmin P 319 Transducer |
h | In dash compass |
Cockpit : FRP Non-Skid with optional teak decks | |
AC generator Onan Marine QD 7/9 kW Space Saver Generator for Marine | |
Bow Thruster : Side Power SE100 – 185T-12V, Joystick Control With Seperate Battery and Voltage Sensitive Relay | |
Stabilizer System: ABT 220 stabilizer with 6 sq. ft. fins with NEW TRACLink Panel | |
Solar Panels: Solar Panels on salon roof to be Solbian or equivalent | |
Mahogany Flag Pole at aft deck | |
*Specifications are subject to change at the discretion of designers and builders |
Photo Gallery
Interior
Running
Launch
Renderings
Construction
Videos
News
Got Summer plans? Nordhavn owners sure do!
We are just days away from the Solstice, and the official start of the summer
Nordhavn 41#10 arrived in rainy East Greenwich, RI
Nordhavn 41#10 arrived in rainy East Greenwich, RI, yesterday, capping off an 8-day delivery trip
N41 – Little ship, big city
N4110 makes it to NYC. And you know what they say…if she can make it
N41 continues its trek north
The rotating crews of PAE staff bringing the N41#10 from Florida up to Rhode Island
PMY Readers choose Nordhavn 41 as best of 2021
Nordhavn 41 earns top honors with PMY readers Click image to download
Power & Motoryacht: Nordhavn 41 Walk-Through
https://www.youtube.com/watch?v=GqW42_NIqs0
Fort Lauderdale International Boat Show, Fort Lauderdale, FL – October 27-31, 2021
Where: Fort Lauderdale International Boat Show, Fort Lauderdale, FL - G Dock Slip location: G
Yachts For Sale: 9+ Five amazing dream yachts under 50 feet – Nordhavn 41 review with David Seal
https://www.youtube.com/watch?app=desktop&v=VzisGy7_V_U&t=5m17s
N4103 delivered to her owners
While the first two Nordhavn 41s are offloading this week in California, hull #3 is
Q&A
At this moment, there is no option to add a stern thruster. We can always add a stern thruster after delivery.
Hi Nathan,
Under the berth mattress will be several removable hatches so you will be able to easily access the storage area underneath. Also, the engine access and saloon flooring hatches will be hinged.
Hi Callan,
The N41 is designed to comfortably mount a 10-foot tender, however provided the tender is within the design weight limitation of the davit, then you could mount a 12-foot tender, with the outboard leg extending a little outboard aft.
Hi Gary,
The commissary head height is roughly 4 feet.
It will likely need to be a relatively small watermaker model. I would almost recommend a low voltage option which are still capable of making around 15GPH.
The square unit you are seeing is a night stand which will house an air handler unit for the HVAC system.
We have done everything in our power to offer this boat as a “turnkey” boat & are not offering a standard options list with this model.
If there is something you would like to have, we are certainly open to discussing the feasibility & pricing that would go along with those ideas.
Hi George,
After market options for paravanes may be available, but it will not be an option to order on a new 41.
Hi Koen,
The larger size of the John Deere 4045 would take up space in the engine room dedicated for working, and so it would be unsuitable in the N41. The N41 is a twin engine boat powered by two Betamarine 85T engines. Props are being built to best suit this model. We are hesitant to offer options on propulsion at this time.
Hi Manuel,
The N41 is not being built to ice class. Right now the only boat we plan to build with ice capability is our N148.
Hi Wan,
The Nordhavn 41 comes standard with twin Betamarine 85T / 74 bhp diesel engines.
Hi Tom,
Hull # 1 will be launched soon and we will be preforming speed / fuel consumption / RPM testing. We anticipate the typical cruising speed to be under 10 knots.
Hi Stan,
Seven of the first 10 N 41s are sold. We offered the first five hulls at special introductory pricing and the factory has allowed us to extend this pricing through hull #10. The price depends on delivery location but is an incredible value as it includes an extensive list of standard equipment. Hull #5 is available and due to finish this year.
Hi Tomaz,
Not at this time. In order to keep the costs down and keep a very efficient build time, we are treating the N41 more like a production boat and keeping buyer options to a minimum. We do have plans for a new build, a 51-footer. This boat will have a flybridge and a pilot house.
Hi Stuart,
Thanks for your email. The new Turkish yard is doing a phenomenal job which we are both excited and delighted about. The wood being used is walnut and you can certainly request this wood to be used on any of our models. Both of our partner factories in Asia have been able to create any finish and design a customer wants. Keep in mind some custom work – depending on the request – does come at additional cost.
We wanted to keep the Nordhavn 41 project as simple as possible which will enable us to keep the price down and the build time on schedule. In order to do this, we have limited the potential for change orders on this boat compared to other Nordhavns. In the case of the watermaker, we have pre-wired and pre-plumbed for the watermaker and reserved a nice piece of real estate for it in the machinery area. The owner of the vessel can then have it installed once the boat reaches its delivery destination.
As of now, there is not an options list for this project.
The main purpose of the solar panels are to keep the batteries fully charged. In the event you are away from the boat for a while you won’t have to worry about batteries dying and a bulge pump not being able to run in case of an emergency.
There really isn’t a whole lot of room for additional batteries given the amount of equipment installed on this boat. You may be able to fit another panel or two if you had a smaller tender for example.
Yes, the N41 comes standard with a hinged mast.
The air draft to the top of the mast is 17′-8″, with the mast folded it is just under 11′.
Yes the N41 is CE category A. The twin engine design was the reason no stern thruster was needed, and also for a boat this size, a bow and stern thruster can be a bit unnecessary.
Yes, we can ship the N41 to most ports in the world, including to Sydney, Australia. Shipping is an additional cost. There would also be additional costs involved on arrival, such as GST and Import Duty. Nordhavn has an office located at Scarborough Marina in Moreton Bay, S.E. Queensland for warranty work and servicing.
Pre-Owned Nordhavn 41s For Sale
See all
NEW LISTING:
NORDHAVN 41
‘ULTIMA’
NAME: | “Ultima” |
MODEL: | Nordhavn 41 |
YEAR: | 2022 |
PRICE REDUCED: | $795,000 |